Development of The Cylindrical Wire Electrical Discharge Machining Process, Part 2 : Surface Integrity and Roundness  

Oleh:

Shih, Albert J. ; Scattergood, Ronald O. ; Jun, Qu

Jenis: Article from Journal - ilmiah internasional
Dalam koleksi: Journal of Manufacturing Science and Engineering vol. 124 no. 3 (Aug. 2002), page 708-714.
Topik: machining impact; devleopment; cylindrical wire electric; machining process; surface integrity; roundness

Ketersediaan

Perpustakaan Pusat (Semanggi) Nomor Panggil: JJ93.3 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada

Lihat Detail Induk

Isi artikel

This study investigates the surface integrity and roundness of parts created by the cylindrical wire EDM process. A mathematical model for the arithmetic average surface roughness on the ideal surface of a cylindrical wire EDM workpiece is first derived. Effects of wire feed rate and part rotational speed on the surface finish and roundness for brass and carbide work - materials at high material removal rates are investigated. The pulse on - time and wire feed rate are varied to explore the best possible surface finish and roundness achievable by the cylindrical wire EDM process. This study has demonstrated that, for carbide parts, an arithmetic average surface roughness and roundness as low as 0.68 and 1.7 µm, respectively, can be achieved. Surfaces of the cylindrical EDM parts were examined using Scanning Electron Microscopy (SEM) to identify the macro-ridges and craters on the surface. Cross -sections of the EDM parts are examined using the SEM to quantify the sub - surface recast layers and heat - affected zones under various process parameters. This study has demonstrated that the cylindrical wire EDM process parameters can be adjusted to achieve either high material removal rate or good surface integrity and roundness.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali