Vibratory Stress Relief in Manufacturing The Rails of a Maglev System  

Oleh:

Ligong, Chen ; Delin, Rao ; Jingguo, Ge

Jenis: Article from Journal - ilmiah internasional
Dalam koleksi: Journal of Manufacturing Science and Engineering vol. 126 no. 2 (May 2004), page 388-390.
Topik: vibratory stress relief; vibratory stress relief; manufacturing; rails; maglev system

Ketersediaan

Perpustakaan Pusat (Semanggi) Nomor Panggil: JJ93.4 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada

Lihat Detail Induk

Isi artikel

To reduce the welding induced residual stress in the rails of a magnetic levitation (maglev) transport system, the procedure of vibratory stress relief (VSR) is applied and discussed in this paper. Suitable welding sequence for the rails is introduced to keep the residual stress low. Qualitative analysis with scanning curve shows that the peak of acceleration becomes higher after the procedure of VSR and the resonant frequency becomes lower. It means that the procedure of VSR is effective according to the JB / T5926 - 91 standard. The residual stress in the rail was measured before VSR and after VSR, using hole - drilling method, and the result shows that the average principal stresses was reduced by about 30 % after VSR.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali