Desain Penyusunan Peredam Kebisingan Menggunakan Plywood, Busa, Tray dan Sabut pada Sumber Statis  

Oleh:

Fachrul, Melati Ferianita ; Yulyanto, Wisnu Eka ; Merya, Asharani

Jenis: Article from Journal - ilmiah nasional - terakreditasi DIKTI
Dalam koleksi: Makara Journal of Technology vol. 15 no. 1 (Apr. 2011), page 63-67.
Topik: Design Noise Reduction; Insertion Loss; Static Source

Ketersediaan

Perpustakaan Pusat (Semanggi) Nomor Panggil: MM64.4 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada

Lihat Detail Induk

Isi artikel

The Formation Design of Noise Reducers from Plywood, Foam, Tray, dan Coconut Fiber for Static Sources. Research was conducted in a semi-anechoic room using a method referring to the ISO 3745. The design used is the Hemisphere in which the source of noise is analogous to engines in an industry. The value reduction in the rate of sound power is obtained by comparing the sound power level before and after control is given. The noise control test materials used consist of layers of plywood, foam, fiber and tray (egg box). The effectiveness of these materials is tested by measuring the sound transmission loss (STL). Test results reveal that the sound power level (Lw) of the source of noise produces a high Lw which is 99.6 dB. at a frequency of 8000 Hz. The measurement of Lw on the source of noise which is covered by plywood produces a total of 78.66 dB Lw with an Lw reduction of 21.02%. The measurement on the sound source covered by plywood and foam materials produces a total of 47.79 dB Lw with an Lw reduction of 52.02%. The measurement of Lw by combining plywood, foam, and tray produces a total of 33.02 dB Lw with an Lw reduction of 66.84%. The measurement of the total Lw after being covered by plywood, foam, fiber, and tray is a total of 31.94 Lw dB with an Lw reduction of 67.93%.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali