Atap dari material GFRP akan mengalami degradasi. Degradasi adalah penurunan kualitas, baik secara fisik dan mekanik, dalam hal ini terjadi pada atap yang sudah digunakan selama beberapa waktu. Secara kasat mata, tidak ditemukan perbedaan yang signifikan pada permukaan atap yang terkena sinar matahari langsung selain perubahan warna. Penelitian ini bertujuan untuk mengetahui laju penurunan kualitas pada material glass fiber reinforced polymer pada atap fibrealum. Pada penelitian ini akan dipaparkan tentang degradasi secara fisik dan mekanik meliputi perubahan warna, adanya void dan serat yang terlihat. Penelitian ini dilakukan dengan melakukan beberapa pengujian pada material yang menerima dan tidak menerima kontak dengan sinar matahari langsung di lapangan. Metode penujian yang dilakukan adalah metode eksperimental dengan pengujian lentur (Flexural Test) , Fourier Transform Infra-Red (FT-IR), dan Scanning Electron Microscope (SEM). Dari pemeriksaan, secara FT-IR untuk material berumur empat tahun dan enam tahun mengalami penurunan sebesar 0,081% dan 0,103%. Secara pengujian lentur, untuk material berumur empat tahun menglami penurunan kekuatan lentur dari 188,05 MPa menjadi 183,10 MPa. Untuk material berumur enam tahun mengalami penurunan kekuatan lentur dari 209,46 MPa menjadi 196,05 MPa. Sedangkan untuk sifat fisiknya ditunjukkan oleh perubahan warna yang terjadi pada material atap GFRP tersebut.
The roof of the GFRP material will be degraded. Degradation is a decrease in quality, both physically and mechanically, in this case occurs on a roof that has been used for some time. In plain view, no significant value was found on the roof surface exposed to direct sunlight. This study aims to determine the rate of degradation in fiber glass reinforced polymer materials on fibrealum roofs. In this study will be explained about physical and mechanical degradation including changes in color, the presence of voids and visible fibers. This research is carried out by conducting several tests on material that receives and does not receive sunlight directly in the field. The method of testing carried out was an experimental method with bending testing (Flexural Test), Fourier Transform Infra-Red (FT-IR), and Scanning Electron Microscope (SEM). From the examination, FT-IR for four-year and six-year materials decreased by 0.081% and 0.103%. In terms of flexural test, for materials within four years there has been a decrease in flexural strength from 188.05 MPa to 183.10 MPa. For material within six years, from 209.46 MPa to 196.05 MPa. As for the physical properties, colors arise that occur in the roof material of the GFRP. |