Analisa Produktivitas dengan Menggunakan Metode Objective Matrix (OMAX) pada Bagian Produksi Potong (Cutting) PT. X.  

Oleh:

LEONARD, KAREL CONSTANTINO ; Wahyu, Marsellinus Bachtiar

Jenis: Article from Journal - ilmiah nasional - tidak terakreditasi DIKTI - atma jaya
Dalam koleksi: Metris: Jurnal Mesin, Elektro, Industri dan Sains vol. 11 no. 01 (Mar. 2010), page 41-48.
Topik: OMAX; Productivity
Fulltext: 6. Marsellinus B. W. (Unika Atma Jaya) pg 41-48_ros.pdf (452.12KB)

Ketersediaan

Perpustakaan Pusat (Semanggi) Nomor Panggil: MM42.4 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada

Lihat Detail Induk

Isi artikel

PT. X established since 1995 is one private company in interior and office furniture. The owners is Mr. Joehanda lihar that owns stock 98% in the PT.X. In 1998, company have a change to focus for partition and furniture for product. Nowadays, to face business competitionsi not easy, because of that, company performance must be increase continually to keep the existentin industrial world. Company's performance can be identify by productivity rating thatgot by measurement process. The degradation of produvtivity was predicted by the high of product reject quantity in cutting station. To find the factor that causing of degradation productivity exactly, OMAX method that possible to do the planning activity, measurement, assessment and to increase productivity in the same times. This measurement was consist by ten chosen criterions, such as reject product reduction, rework product reduction, scrap product reduction, labor use efficiency, material use efficiancy, production capacity optimalization, working hout optimalization, total absent hour reduction, overtime reduction, and absenteesm reduction. The measurement results conclude the productivity indexes that achieved since measurement period january = 86.83 %, February=68.82 %, March=82.64 %, April= 112.21 %, May=111.21 %. Based on the analysis result, known the first criteria is being prioritized to be repaired. The improvement using FMEA method and the suggestion are doing machines inspection, sparepart repairs, decide the work procedur, setting machines. The implementation result describe criteria 1th, 5th and 6th is being increased from 0-0-0 to 7-10-7.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali