A Study of Fin Effects in The Measurement of Temperature Using Surface-Mounted Thermocouples  

Oleh:

Tszeng, T. C. ; Saraf, V.

Jenis: Article from Bulletin/Magazine
Dalam koleksi: Journal of Heat Transfer vol. 125 no. 5 (Oct. 2003), page 926-935.
Topik: measurement; fin effects; measurment; temperature; surface - mounted; thermocouples

Ketersediaan

Perpustakaan Pusat (Semanggi) Nomor Panggil: JJ90.7 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada

Lihat Detail Induk

Isi artikel

The present study addresses the effects of thermocouples on the measured temperature when such thermocouples are mounted directly on the surface of the object. A surface - mounted thermocouple is a very convenient way of measuring the surface temperature. However, the heat conduction into / from the thermocouple wire changes the local temperature at the thermocouple junctions along with the immediate vicinity of the thermocouple. As a consequence, the emf appearing at the thermocouple terminals does not correspond to the actual surface temperature. In this paper, we first discuss the general characteristics of the enhanced heating / cooling due to the so -called "fin effects" associated with the surface - mounted thermocouples. An embedded computational model is then developed so that the model can be used in conjunction with a regular FEM model for the multidimensional calculation of the heating or cooling of a part. The embedded computational model is shown to offer very accurate calculation of the temperature at the junction of thermocouple wire. The developed computational model is further used in the inverse heat transfer calculation for a Jominy end quench experiment.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali