Evaporation Heat Transfer and Pressure Drop of Refrigerant R-410A Flow in A Vertical Plate Heat Exchanger  

Oleh:

Lin, T. F. ; Hsieh, Y. Y.

Jenis: Article from Bulletin/Magazine
Dalam koleksi: Journal of Heat Transfer vol. 125 no. 5 (Oct. 2003), page 852-857.
Topik: PLATES (ENGINEERING); evaporation; heat transfer; pressure drop; refrigerant; flow; vertical plate; heat exchanger

Ketersediaan

Perpustakaan Pusat (Semanggi) Nomor Panggil: JJ90.7 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada

Lihat Detail Induk

Isi artikel

Experiments are carried out here to measure the evaporation heat transfer coefficient hr and associated frictional pressure drop AP(f) in a vertical plate heat exchanger for refrigerant R-410A. The heat exchanger consists of two vertical counterflow channels which are formed by three plates whose surface corrugations have a sine shape and a chevron angle of 60 deg. Upflow boiling of refrigerant R-410A receives heat from the hot downflow of water. In the experiments, the mean vapor quality in the refrigerant channel is varied from 0.10 to 0.80, the mass flux from 50 to 100 kg / m(2)s, and the imposed heat flux from 10 to 20 kW / m(2) for the system pressure fixed at 1.08 and 1.25 MPa. The measured data indicate that both h(r) and AP(r) increase with the refrigerant mass flux except at low vapor quality. In addition, raising the imposed heat flux is found to significantly improve h(r) for the entire range of the mean vapor quality. However, the corresponding friction factor ftp is insensitive to the imposed heat flux and refrigerant pressure. Based on the present data, empirical correlations are provided for h(r) and f(tp), for R-410A in the plate heat exchanger.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali