Contribution of Support Means to Stresses Developed in Sheet Metal Coils  

Oleh:

Lee, Y. M. ; Wickert, J. A.

Jenis: Article from Journal - ilmiah internasional
Dalam koleksi: Journal of Manufacturing Science and Engineering vol. 126 no. 3 (Aug. 2004), page 591-598.
Topik: sheet metal work; contribution; support means; stress developed; sheet metal coils

Ketersediaan

Perpustakaan Pusat (Semanggi) Nomor Panggil: JJ93.4 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada

Lihat Detail Induk

Isi artikel

Sheet metal is often stored in large wound coils and processed through such manufacturing stages as cleaning, coating, and slitting in a finishing plant or thickness reduction in a rolling mill. During winding and unwinding operations, as well as during storage and transportation, a coil can be supported in a variety of methods. The coil can be formed on a relatively compliant fiber core, or it can be mounted with the core onto a drive shaft or a pair of core chucks. The stresses within the coil develop in response to the sheet metal's material properties, the process tension, and the type of support condition that is present along the coil's inner diameter. In this investigation, a two - dimensional finite element model is applied to capture the stress distribution within sheet metal coils. The influence of support condition on the state of stress is investigated for sheet metal on a core alone, and for the cases in which the coil is supported by a drive shaft or core chucks during winding. The radial and width - wise variations of the stress components are calculated and compared in the light of the differences in compliance between the three means of support.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali