Feasibility Study On Solidification Of Municipal Solid Waste Incinerator Fly Ash With Circulating Fluidized Bed Combustion Coal Fly Ash  

Oleh:

[s.n]

Jenis: Article from Journal - ilmiah internasional
Dalam koleksi: Waste Management & Research vol. 27 no. 3 (Jun. 2009), page 258-266.
Topik: Municipal solid waste incinerator fly ash; circulation fluidized bed combustion fly ash; solidification/stabilization; heavy metal; wmr 08–0003
Fulltext: 258.pdf (760.19KB)

Isi artikel

The objective of this study was to assess the feasibility of solidification of municipal solid waste incinerator (MSWI) fly ash with circulation fluidized bed combustion (CFBC) fly ash, which is unsuitable as a cement replacement due to its high amounts of carbon, lime and anhydrite. The solidification process was conducted on samples prepared from MSWI fly ash, binders (cement clinkers and CFBC fly ash were mixed at two replacement ratios) and water (water/solid weight ratio = 0.4), among which the MSWI fly ash replaced each binder at the ratio of 0, 20, 40, 60 and 80% by dry weight. The samples were subjected to compressive strength tests and Toxicity Characteristic Leaching Procedure and the results showed that all solidified MSWI fly ash can meet the landfill standard imposed by US EPA after 28 days of curing. Micro-analysis (X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectrophotometry) revealed that the main hydrate products were C–S–H gel and ettringite, which have a positive effect on heavy metals retention. Therefore, this method provides a possibility to achieve a cheap and effective solution for MSWI fly ash management and use for CFBC fly ash.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali