Criterion for Prevention of Central Bursting in Forward Extrusions Through Spherical Dies Using The Finite Element Method  

Oleh:

Tyne, C. J. van ; Sriram, S.

Jenis: Article from Journal - ilmiah internasional
Dalam koleksi: Journal of Manufacturing Science and Engineering vol. 124 no. 1 (Feb. 2002), page 65-70.
Topik: finite element; criterion; prevention; central bursting; spherical dies; finite element

Ketersediaan

Perpustakaan Pusat (Semanggi) Nomor Panggil: JJ93.3 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada

Lihat Detail Induk

Isi artikel

Spherical dies are increasing in popularity in the cold - forming industry because of the ease in subsequent secondary operations. This paper presents criteria curves, calculated using the finite element method, to avoid central bursting or internal chevrons in forward extrusions through spherical dies. Critical values of mean stress at the centerline of the extrusion are used as failure criteria to distinguish between acceptable and unacceptable die designs. These failure criteria are conservative in that the critical step for central bursting is considered to be the formation of a microvoid during extrusion, rather than linking of the voids during continued deformation. The resulting process criteria curves are conservative estimates of internal chevron formation during extrusion through spherical dies.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali