Kaji Numerik dan Eksperimental Penyerapan Energi Tabung Aluminium Bergalur Dengan Beban Aksial  

Oleh:

Hadi, Bambang K. ; Putra, Ichsan S. ; Basuki, David ; Tedy S., Yanyan

Jenis: Article from Journal - ilmiah nasional - tidak terakreditasi DIKTI
Dalam koleksi: Mesin: Jurnal Teknik Mesin vol. 22 no. 1 (2007), page 29-34.
Topik: Energy Absorbing Structures; Grooved Tubes

Ketersediaan

Perpustakaan Pusat (Semanggi) Nomor Panggil: MM73, MM73.1 Non-tandon: 3 (dapat dipinjam: 0) Tandon: tidak ada

Lihat Detail Induk

Isi artikel

Grooved tubes under axial compression are widely used as efficient energy absorption structures. The energy absorption uses plastic folding mechanisms that are formed during the loading. In this paper, the behaviors of grooved tubes under axial compression loading are discussed. The diameter of the tubes is 100 mm, with 2 mm thickness and the lenght is 72 mm. The number of grooves is 3 and 7, with the groove's depth is 1 mm. the study uses analytical method, numerical method using explicit dynamic of ABAQUS as well as experimental methods. The results show that increasing the number of grooves will reduce the mean crushing load, Pm. The numerical analysis is able to predict precisely the final plastic folding form of the tubes compared to the experimental results. The difference of Pm among the three methods varies between 1 - 20%. Further investigation is needed to reduce the differences. In all the studies conducted here, the mean crushing loads of the experimental data are always greater than both numerical and analytical methods.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali