Detail Analyses of Contact Pressure and Stress Amplitude Effects on Fretting Fatigue Life   Oleh:  Mall, S. ; Iyer, K. Jenis: Article from Bulletin/Magazine Dalam koleksi: Journal of Engineering Materials and Technology vol. 123 no. 1 (2001), page 85-93. Topik: STRESSES; contact pressure; stress amplitude effects; freeting fatigue life Ketersediaan Perpustakaan Pusat (Semanggi) Nomor Panggil: JJ87.2 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada     Lihat Detail Induk Isi artikel Elastic - plastic finite element analyses of a cylinder - on - plate configuration, studied experimentally, were performed to provide an explanation for the decrease in fretting fatigue life with increasing contact pressure. Three values of normal load, namely 1338 N, 2230 N, and 3567 N, and three stress ratios (0.1, 0.5, and 0.7) were considered. Based on a previously determined dependency between contact pressure and friction coefficient, the effect of coefficient of friction was also evaluated. The deformation remained elastic under all conditions examined. Cyclic, interfacial stresses, and slips were analyzed in detail. The amplification of remotely applied cyclic stress in the contact region is shown to provide a rationale for the effect of contact pressure and stress amplitude on life. Comparisons with previous experiments indicate that the local stress range computed from finite element analysis may be sufficient for predicting fretting fatigue life. Further, the results suggest that the slip amplitude and shear traction may be neglected for this purpose. Opini Anda Klik untuk menuliskan opini Anda tentang koleksi ini! Kembali

Copyright © 2006, 2007 Unika Atma Jaya, all rights reserved