Detail Models for Cyclic Ratchetting Plasticity - Integration and Calibration   Oleh:  Ekh, Magnus ; Johansson, Anders ; Thorberntsson, Hans ; Josefson, B. Lennart Jenis: Article from Bulletin/Magazine Dalam koleksi: Journal of Engineering Materials and Technology vol. 122 no. 1 (2000), page 49-55. Topik: CALIBRATION; cyclic ratchetting; plasticity; integration and calibration Ketersediaan Perpustakaan Pusat (Semanggi) Nomor Panggil: JJ87.1 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada     Lihat Detail Induk Isi artikel Three well - known ratchetting models for metals with different hardening rules were calibrated using uniaxial experimental data from Bower (1989) [J. Mech. Phys. Solids, 31, pp. 455 – 470], and implemented in the FE code ABAQUS (Hibbitt et al., 1997 [ABAQUS Version 5.7]) to predict ratchetting results for a tension-torsion specimen. The models were integrated numerically by the implicit Backward Euler rule, and the material parameters were calibrated via optimization for the uniaxial experimental data. The algorithmic tangent stiffnesses of the models were derived to obtain efficient FE implementations. The calculated results for an FE model of the tension - torsion specimen were compared to experimental results. The model proposed by Jiang and Sehitoglu (1995) [Wear, 191, pp. 35 – 44] showed the best agreement both for the uniaxial and the structural component case. Opini Anda Klik untuk menuliskan opini Anda tentang koleksi ini! Kembali

Copyright © 2006, 2007 Unika Atma Jaya, all rights reserved