Geometric Design of 3R Robot Manipulators for Reaching Four End-Effector Spatial Poses  

Oleh:

Lee, Eric ; Mavroidis, Constantinos

Jenis: Article from Journal - ilmiah internasional
Dalam koleksi: The International Journal of Robotics Research vol. 23 no. 3 (Mar. 2004), page 247-254.
Topik: geometric design; robot manipulators; polynomial homotopy continuation
Fulltext: 247.pdf (125.86KB)

Isi artikel

In this paper, the four-precision-point geometric design problem of serial-link robot manipulators with three revolute joints is solved using a polynomial continuation method. At each precision point, the end-effector spatial locations are defined. The dimensions of the geometric parameters of the 3R manipulator are computed so that the manipulator's end-effector will be able to reach these four pre-specified locations. Denavit and Hartenberg parameters and 4 × 4 homogeneous matrices are used to formulate the problem and obtain the design equations. Three of the design parameters are set as free choices and their values are selected arbitrarily. Two different cases for selecting the free choices are considered and their design equations are solved using polynomial homotopy continuation. In both cases for free choice selection, 36 distinct manipulators are found, the end-effectors of which can reach the four specified spatial positions and orientations.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali