Heat Transfer in Rotating Rectangular Cooling Channels (AR=4) With Angled Ribs  

Oleh:

Griffith, Todd S. ; Al-Hadhrami, Luai ; Han, Je-Chin

Jenis: Article from Bulletin/Magazine
Dalam koleksi: Journal of Heat Transfer vol. 124 no. 4 (Aug. 2002), page 617-625.
Topik: rotating; heat transfer; rotating rectangular; cooling channels; angled ribs

Ketersediaan

Perpustakaan Pusat (Semanggi) Nomor Panggil: JJ90.5 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada

Lihat Detail Induk

Isi artikel

An investigation into determining the effect of rotation on heat transfer in a rib - roughened rectangular channel with aspect ratio of 4 : 1 is detailed in this paper. A broad range of flow parameters have been selected including Reynolds number (Re = 5000 – 40000), rotation number (Ro = 0.04 – 0.3) and coolant to wall density ratio at the inlet (AP / P)(i) = 0.122. The rib turbulators, attached to the leading and trailing surface, are oriented at an angle (a = 45 deg) to the direction of flow. The effect of channel orientations of b = 90 deg and 135 deg with respect to the plane of rotation is also investigated. Results show that the narrow rectangular passage exhibits a much higher heat transfer enhancement for the ribbed surface than the square and 2 : 1 duct previously investigated. Also, duct orientation significantly affects the leading and side surfaces, yet does not have much affect on the trailing surfaces for both smooth and ribbed surfaces. Furthermore, spanwise heat transfer distributions exist across the leading and trailing surfaces and are accentuated by the use of angled ribs. The smooth and ribbed case trailing surfaces and smooth case side surfaces exhibited a strong dependence on rotation number.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali