Predicting Thermal Contact Resistance Between Molten Metal Droplets and A Solid Surface  

Oleh:

Chandra, Sanjeev ; Heichal, Yoav

Jenis: Article from Bulletin/Magazine
Dalam koleksi: Journal of Heat Transfer vol. 127 no. 11 (Nov. 2005), page 1269-1275.
Topik: droplet; thermal contact; resistance; molten metal droplets; solid surface

Ketersediaan

Perpustakaan Pusat (Semanggi) Nomor Panggil: JJ90.10 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada

Lihat Detail Induk

Isi artikel

Thermal contact resistance between molten metal droplets (aluminum alloy 380 and bismuth) and solid plates (steel and brass) was measured experimentally. The diameter of the droplets was 4 mm, and droplet impact velocity ranged between 1 and 3 m/s. Substrate temperature was varied from 25 to 300° C and roughness from 0.06 to 5.0 µm. Substrate temperature variation under impacting droplets was measured using fast temperature sensors that had a response time of 40 ns and recorded substrate temperatures at five different radial locations under each droplet. Thermal contact resistance during the first few milliseconds of impact was obtained by matching measured surface temperature variation with an analytical solution of the one - dimensional transient heat conduction equation. An analytical model of the deformation of a free liquid surface in contact with a rough solid was used to calculate the true area of contact between them and, thereby, the thermal contact resistance. Test results agreed well with predictions from the analytical model. Thermal contact resistance values ranged from 10 – 7 to 3 × 10(–6) m2 K / W, increasing with surface roughness and decreasing with rising impact velocity.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali