Teknologi Pengolahan Merkuri Dalam Limbah Campuran Radioaktif  

Oleh:

Alimah, Siti ; Finahari, Ida N.

Jenis: Article from Journal - ilmiah nasional - tidak terakreditasi DIKTI - atma jaya
Dalam koleksi: Metris: Jurnal Mesin, Elektro, Industri dan Sains vol. 6 no. 2 (Jun. 2005), page 93-100.
Topik: LIMBAH; limbah campuran radioaktif; merkuri
Fulltext: hal 93-100.pdf (340.03KB)

Ketersediaan

Perpustakaan Pusat (Semanggi) Nomor Panggil: MM42 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada

Lihat Detail Induk

Isi artikel

The treatment Technology of Mercury in the Radioactive Mixed Waste. The study of the treatment technology of mercury in the radioactive mixed waste has been done. The treatment process of mercury in the radioactive mixed waste can be done using stabilization process (SPSS, NFS DeHg and ATG process) and thermal treatment process (sepradyne raduce process). With stabilization process, the radioactive mixed waste with 17-54% weight increase can be achieved. With thermal treatment process, the radioactive mixed waste with 9-52% weight decrease can be achieved. Using all treatment process technologies mentioned above, the resulted radioactive mixed waste contains mercury at a concentration meet allowable safety limit (=0,025 mg/L). The mentioned waste is sent to the storage facility. Cost analysis shows that the sepradyne raduce process technology needs operation cycles unit cost, which is the lowest among the process technologies mentioned above.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali