Investigating Machining Impact on Fatigue Variance : A Machining Quallity Perspective  

Oleh:

Liu, C. Richard ; Yang, Xiaoping

Jenis: Article from Journal - ilmiah internasional
Dalam koleksi: Journal of Manufacturing Science and Engineering vol. 127 no. 3 (Aug. 2005), page 492-502.
Topik: machining impact; investigating; machining impact; fatigue variance; machining quality

Ketersediaan

Perpustakaan Pusat (Semanggi) Nomor Panggil: JJ93.7 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada

Lihat Detail Induk

Isi artikel

Fatigue life of nominally identical structures under nominally identical loading conditions can scatter widely. This study has investigated the impact of machining processes on such scatters. After Ti 6Al - 4V samples were surface ground and face turned, they were subject to constant amplitude four - point bending fatigue tests under room temperature. The best - case scenario of process capability ratios of fatigue for these samples were evaluated with assumed tolerances of fatigue life. Based on these ratios, the numbers of nonconforming parts were estimated. Under the machining conditions from the Machining Data Handbook (Machining Data Center, Cincinnati, 1980), up to 39% of samples due to one process are expected to be nonconforming, whereas only up to 0.6 % of samples due to the other process are expected to be nonconforming. The ramifications in terms of cost for machining quality control due to the different capability ratios have been discussed. The current findings indicate an urgent need to further the study of this issue in a scientific manner.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali