Temperature Measurement by Visible Pyrometry : Orthogonal Cutting Application  

Oleh:

Ranc, N. ; Philippon, S. ; Sutter, G. ; Pina, V.

Jenis: Article from Bulletin/Magazine
Dalam koleksi: Journal of Heat Transfer vol. 126 no. 6 (Dec. 2004), page 931-936.
Topik: cutting; temperature measurement; visible pyrometry; orthogonal cutting; application

Ketersediaan

Perpustakaan Pusat (Semanggi) Nomor Panggil: JJ90.9 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada

Lihat Detail Induk

Isi artikel

The working processes of metallic materials at high strain rate like forging, stamping and machining often induce high temperatures that are difficult to quantify precisely. In this work we, developed a high-speed broad band visible pyrometer using an intensified CCD camera (spectral range : 0.4 µm – 0.9 µm). The advantage of the visible pyrometry technique is to limit the temperature error due to the uncertainties on the emissivity value and to have a good spatial resolution (3.6 µm) and a large observation area. This pyrometer was validated in the case of high speed machining and more precisely in the orthogonal cutting of a low carbon steel XC18. The cutting speed varies between 22 ms(–1) and 60 ms(–1). The experimental device allows one to visualize the evolution of the temperature field in the chip according to the cutting speed. The maximum temperature in the chip can reach 730° C and minimal temperature which can be detected is around 550° C.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali