Shock Wave Propagation Into A Dust-Gas Suspension Inside A Double-Bend Conduit  

Oleh:

Igra, O. ; Hu, G. Q. ; Falcovitz, J. ; Wu, X.

Jenis: Article from Bulletin/Magazine
Dalam koleksi: Journal of Fluids Engineering vol. 124 no. 2 (2002), page 483-491.
Topik: BACKPROPAGATION; shock wave; propagation; dust - gas; suspension; double - bend; conduit

Ketersediaan

Perpustakaan Pusat (Semanggi) Nomor Panggil: JJ89.3 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada

Lihat Detail Induk

Isi artikel

Using conduits in which a transmitted shock wave experiences abrupt changes in its direction of propagation is an effective means for shock wave attenuation. An additional attenuation of the transmitted shock wave is obtained when the medium contained inside the conduit (through which the shock wave is transmitted) is a suspension rather than a pure gas. The present numerical study shows that adding small solid particles (dust) into the gaseous phase results in sharp attenuation of all shock waves passing through the conduit. It is shown that the smaller the dust particles diameter is, the higher the shock attenuation becomes. Increasing the dust mass loading in the suspension also causes a quick attenuation. By proper choice of dust mass loading in the suspension, or the particles diameter, it is possible to ensure that the emerging wave from the conduit exit channel is a (smooth) compression wave, rather than a shock wave.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali