Shot Sleeve Wave Dynamics in The Slow Phase of Die Casting Injection  

Oleh:

Trapaga, G. ; Hernandez, J. ; Faura, F. ; Lopez, J.

Jenis: Article from Bulletin/Magazine
Dalam koleksi: Journal of Fluids Engineering vol. 122 no. 2 (2000), page 349-356.
Topik: METAL CASTING; sleeve wave; slowphase; die casting; injection

Ketersediaan

Perpustakaan Pusat (Semanggi) Nomor Panggil: JJ89.1 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada

Lihat Detail Induk

Isi artikel

An analysis is carried out on the wave formed during the slow phase of die casting injection processes. Viscous effects are assumed to be negligible and the problem is treated two - dimensionally using finite amplitude wave theory. Two commonly used types of plunger movements are considered, for which all the possible wave profiles are analyzed in depth as a function of the parameters which characterize the law of acceleration applied to the plunger, the initial shot sleeve filling fraction, and the geometrical characteristics of the problem. Different relationships between the relevant dimensionless parameters of the system are proposed, which make it possible to optimize the injection process, and so reduce the entrapment of air which leads to porosity. The validity of such relationships is analyzed in detail for different ranges of parameters. Some of the results obtained for the optimum acceleration are compared with those of other authors and experimental measurements. Finally, a law of plunger acceleration which would completely eliminate the air from the shot sleeve at the end of the slow phase of injection and minimizes the filling time is derived.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali