On the Development of a Vibration Energy Harvesting Mechanism and the Influence of the Number of Wire Turns  

Oleh:

Hendrowati, Wiwiek ; W., Bambang Daryanto ; Sutantra, I Nyoman

Jenis: Article from Journal - ilmiah nasional - terakreditasi DIKTI
Dalam koleksi: IPTEK: The Journal for Technology and Science vol. 21 no. 2 (May 2010), page 85-89.
Topik: Vibration Energy Harvesting; Electro-Magnetic Method; Translational Vibration; Wire Turns
Fulltext: Harvesting Mechanism and the Influence of the Number of Wire Turns_2.pdf (314.79KB)

Ketersediaan

Perpustakaan Pusat (Semanggi) Nomor Panggil: MM48 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada

Lihat Detail Induk

Isi artikel

This article deals with a research activity to design and to build a vibration energy harvesting (VEH) mechanism based on an electromagnetic method, where the energy source is from translational-harmonic vibration. In the developed VEH mechanism, a magnetic mass moves linearly back and forth within an electrical coil made from conductive-wire windings. In accordance to oscillating mass motion of a particular amplitude and frequency, the voltage which can be harvested is then measured and analyzed. The choice of an electromagnetic method stemmed from the availability of materials to construct the VEH mechanism. In the VEH mechanism, a mass size, a wire diameter and material, a coil length, and a vibration amplitude and frequency were considered constant, while the number of wire turns was varied. The constructed VEH was tested for 1,000, 1,500, 2,000, 2,500, and 3,000wire turns. The voltage density being harvested was recorded as 0.2820, 0.3715, 0.5695, 0.7343 and 0.9300 volt/cm3, respectively.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali