The Onset of Flow Instability in Uniformly Heated Horizontal Microchannels  

Oleh:

Kennedy, J. E. ; Roach, G. M., [Jr.] ; Dowling, M. F. ; Abdel-Khalik, S.I. ; Ghiaasiaan, S. M. ; Jeter, S. M. ; Quershi, Z. H.

Jenis: Article from Bulletin/Magazine
Dalam koleksi: Journal of Heat Transfer vol. 122 no. 1 (Feb. 2000), page 118-125.
Topik: STABILITY; onset; flow instability; uniformly; horizontal; microchannels

Ketersediaan

Perpustakaan Pusat (Semanggi) Nomor Panggil: JJ90.1 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada

Lihat Detail Induk

Isi artikel

Onset of nucleate boiling and onset of flow instability in uniformly heated microchannels with subcooled water flow were experimentally investigated using 22 - cm long tubular test sections, 1.17 mm and 1.45 mm in diameter, with a 16 -cm long heated length. Important experimental parameter ranges were : 3.44 to 10.34 bar channel exit pressure ; 800 to 4500 kg / m2s mass flux (1 to 5 m / s inlet velocity) ; 0 to 4.0 MW / m2 channel wall heat flux ; and 7440 – 33,000 Peclet number at the onset of flow instability. Demand curves (pressure drop versus mass flow rate curves for fixed wall heat flux and channel exit pressure) were generated for the test sections, and were utilized for the specification of the onset of nucleate boiling and the onset of flow instability points. The obtained onset of nucleate boiling and onset of flow instability data are presented and compared with relevant widely used correlations.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali