The Use Of By-Products From Metallurgical And Mineral Industries As Filler In Cement-Based Materials  

Oleh:

Moosberg, Helena ; Lagerblad, Björn ; Forssberg, Eric

Jenis: Article from Journal - ilmiah internasional
Dalam koleksi: Waste Management & Research vol. 21 no. 1 (Feb. 2003), page 29-37.
Topik: Concrete; by-products; filler; cement properties; heat of hydration; compressive; strength; workability; expansion; shrinkage; wmr 468–4.
Fulltext: 29.pdf (721.83KB)

Isi artikel

This investigation has been made in order to make it possible to increase the use of by-products in cement-based materials. Use of by-products requires a screening procedure that will reliably determine their impact on concrete. A test procedure was developed. The most important properties were considered to be strength development, shrinkage, expansion and workability. The methods used were calorimetry, flow table tests, F-shape measurements, measurements of compressive and flexural strength and shrinkage/expansion measurements. Scanning electron microscopy was used to verify some results. Twelve byproducts were collected from Swedish metallurgical and mineral industries and classified according to the test procedure. The investigation showed that the test procedure clearly screened out the materials that can be used in the production of concrete from the unsuitable ones.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali