Use Of Gold Mill Tailings In Making Bricks: A Feasibility Study  

Oleh:

Roy, Surendra ; Adhikari, Govind R. ; Gupta, Rama N.

Jenis: Article from Journal - ilmiah internasional
Dalam koleksi: Waste Management & Research vol. 25 no. 5 (Oct. 2007), page 475-482.
Topik: Gold mill tailings; tailing utilization; brick making; Kolar Gold Fields; wmr 1113–5
Fulltext: 475.pdf (673.63KB)

Isi artikel

Mill tailings dumps at Kolar Gold Fields, Karnataka, are creating environmental problems. One of the solutions to these problems is to use the mill tailings for some useful purpose. This study examined the possibility of making bricks from the mill tailings with some additives in laboratory experiments. Samples of the mill tailings and the additives were analysed for particle size distribution, Atterberg limits and specific gravity. The plasticity index of the mill tailings being zero, they could not be used directly for making bricks. Therefore some additives that had plasticity or binding properties were mixed with the mill tailings. Ordinary Portland cement, black cotton soils and red soils were selected as additives. Each of the additives was mixed separately with the mill tailings in different proportions by weight and a large number of bricks were prepared using metallic moulds. The bricks were termed as cement–tailings bricks or soil–tailings bricks, depending on the additives used. The cement–tailings bricks were cured for different periods and their corresponding compressive strengths were determined. The bricks with 20% of cement and 14 days of curing were found to be suitable. The soil–tailings bricks were sun-dried and then fired in a furnace at different temperatures. The quality of bricks was assessed in terms of linear shrinkage, water absorption and compressive strength. The cost analysis revealed that cement–tailings bricks would be uneconomical whereas the soil–tailings bricks would be very economical.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali