Leaching Behaviour And Mechanical Properties Of Copper Flotation Waste In Stabilized/Solidified Products  

Oleh:

[s.n]

Jenis: Article from Journal - ilmiah internasional
Dalam koleksi: Waste Management & Research vol. 27 no. 1 (Feb. 2009), page 70-77.
Topik: Copper flotation waste; clinoptilolite; stabilization/solidification; compressive strength; leachability; wmr 1213–5
Fulltext: 70.pdf (585.97KB)

Isi artikel

This research describes the investigation of a cement-based solidification/stabilization process for the safe disposal of copper flotation waste and the effect on cement properties of the addition of copper flotation waste (CW) and clinoptilolite (C). In addition to the reference mixture, 17 different mixtures were prepared using different proportions of CW and C. Physical properties such as setting time, specific surface area and compressive strength were determined and compared to a reference mixture and Turkish standards (TS). Different mixtures with the copper flotation waste portion ranging from 2.5 to 12.5% by weight of the mixture were tested for copper leachability. The results show that as cement replacement materials especially clinoptilolite had clear effects on the mechanical properties. Substitution of 5% copper flotation waste for Portland cement gave a similar strength performance to the reference mixture. Higher copper flotation waste addition such as 12.5% replacement yielded lower strength values. As a result, copper flotation waste and clinoptilolite can be used as cementitious materials, and copper flotation waste also can be safely stabilized/solidified in a cement-based solidification/stabilization system.

Opini Anda

Klik untuk menuliskan opini Anda tentang koleksi ini!

Kembali