Detail In Process Control of Strain in A Stretch Forming Process   Oleh:  Hardt, D. E. ; Norfleet, W. A. ; Valentin, V. M. ; Parris, A. Jenis: Article from Bulletin/Magazine Dalam koleksi: Journal of Engineering Materials and Technology vol. 123 no. 4 (2001), page 496. Topik: control; process control; stretch forming Ketersediaan Perpustakaan Pusat (Semanggi) Nomor Panggil: JJ87.2 Non-tandon: 1 (dapat dipinjam: 0) Tandon: tidak ada     Lihat Detail Induk Isi artikel The process of stretch forming is used extensively in the aerospace industry to form large sheet panels of mild curvature. This has traditionally been a low precision process requiring considerable hand - working at assembly. However, recent de mands for faster, less wasteful production have placed new demands on the accuracy and consistency (quality) of this process. In this paper the various modes of control for this process are examined, from both an analytical and experimental point of view. It is shown clearly that the process is least sensitive to material and machine property variations if controlled to a target level of strain in specific areas of the sheet. This method is compared with the conventional methods of controlling either the force applied to the sheet during stretching or the displacement of the stretch jaws. A series of both lab scale and full production experiments concur with the analytical findings, demonstrating reduced process variation if strain feedback is used. Lab experiments and analysis indicate that far greater reductions are possible if a more precise form of strain control is used. In production trials forming wing leading edges, a manually implemented strain control showed a shape variation reduction of 50 percent over normal factory practice using force control. Opini Anda Klik untuk menuliskan opini Anda tentang koleksi ini! Kembali

Copyright © 2006, 2007 Unika Atma Jaya, all rights reserved